Dexter Laundry A Series Service Procedures And Parts Data

Preventative Maintenance
Daily
Step 1: Clean the top and the cabinet to remove residue.
Step 2: Clean the soap dispenser and soap lid
.
Step 3: Check the drain for leaking and proper draining.
Step 4: Check the loading door for leaks.
Step 5: Clean the door seal of all foreign material.
Step 6: Leave the loading door open to aerate the washer when not in use.
Quarterly
Make sure the power is disconnected before making the following checks.
Step 1: Check the drive belt for wear and proper tension.
Step 2: Clean lint and other foreign material from around drive motor.
Step 3: Check all water connections for leaks.
Step 4: Wipe and clean the inside of the washer and check all electrical components for
moisture and dust.
Step 5: Remove and clean water inlet hose fi lters. Replace if necessary.
Step 6: After any service always replace all panels before reconnecting electrical power.
Maintenance
106

Dexter Laundry A Series Specifications

General

Brand	Dexter Laundry
Model	A Series
Category	Washer
Language	English