Transient Voltage Surge Suppressors
Like most electrical equipment your new machine can be damaged or have its life short-
ened by voltage surges due to lightening strikes which are not covered by factory warranty.
Local power distribution problems also can be detrimental to the life of electrical com-
ponents. We recommend the installation of transient voltage surge suppressors for your
new equipment. These devices may be placed at the power supply panel for the complete
installation and don’t require an individual device for each machine.
These surge protectors help to protect equipment from large spikes and also from small
ongoing spikes in the power that occur on a day to day basis. These smaller surges can
shorten overall life of electrical components of all types and cause their failure at a later
date. Although they can’t protect against all events, these protective devices have a good
reputation for signifi cantly lengthening the useful life of electronic components. Electronic
components are helped to have a longer useful life when they are supplied with the clean
stable electrical power they like. We are including the following names and phone numbers
of a few suppliers of these devices for those who don’t currently have a source.
MANUFACTURER CONTACT PHONE
Innovative Technology, Inc Factory 1-800-647-8877
or www.itvss.com
EFI Electronics Corporation Factory (John Keser) 1-800-877-1174 or
www.efi net.com
Distributor 1-800-994-2936
– Azen Corp Chad Perschon
MCG Surge Protection Factory 1-800-851-1508 or
www.mcgsurge.com
Advanced Protection Factory 1-800-237-4567 or
Technologies Inc.info@
apttvss.com
Alex Michalas
Maintenance
107
To Next Page
Loading...
Need help?
General
