Dexter Laundry A Series Service Procedures And Parts Data

Machine Programming Instructions
Washer Cycle Parameter Ranges
The range of each cycle parameter is shown below:
Cycle Time 0 to 15 minutes for Prewash, Wash, Rinse 1, 2, 3 and 4
1 to 15 minutes for Final Rinse
For the baths that can, if the time is set to zero, then the bath will be
eliminated from the cycle.
Water Temp HH – hot, CH – warm, CC – cold, EE – no water
Water Level HI – high, LO – low
Delay Fill The selections are “d” for delay the bath time until water level is reached
or “t” time counts down during bath time fi ll.
Spin Time 0 to 10 minutes for Prewash, Wash, Rinse, 2,3, and 4
1 to 10 minutes for Final Spin
Injection Source 0 to 6
(see chart on following pages)
24

Dexter Laundry A Series Specifications

General

Brand	Dexter Laundry
Model	A Series
Category	Washer
Language	English