Dexter Laundry A Series Service Procedures And Parts Data

Machine Programming Instructions
Programming Instructions
THERE ARE TWO WAYS TO MODIFY PROGRAMMING OF THE V-SERIES OPL SIX (6)
PREPROGRAMMED FORMULAS
Option 1: Programming can be accomplished manually using the machine controls or
by connecting to the machine control using a PDA (personal digital
assistant). For instructions on using a PDA with this washer control and
software, please contact your local Dexter distributor. Please read below
for manual programming instructions.
The keypad layout for the washer control is shown above.
Option 2: Wash Cycle Manually Programming
1. Turn on the power to the washer.
2. Turn the Run/Program key to the Program position. Display will show
“CO” and the “ADD BLEACH” will blink and will continue to blink
during the programming mode.
3. Press the “DOWN” or “UP” buttons to select which cycle to alter. When
the desired cycle number is displayed, press “START”.
4. The display should now show a “b”. The “b” and the cycle indicator
lights indicate which bath is being selected to alter. Press the “UP”
and “DOWN” buttons to select a bath to change and then press
“START”.
22

Dexter Laundry A Series Specifications

General

Brand	Dexter Laundry
Model	A Series
Category	Washer
Language	English