Digi DI-80 - Page 13

- 13 -
DI-80 USER MANUAL
OPERATION KEY DISPLAY
¼T» NET
kg
0. 0 0 0
T T
6. Press [T] key to subtract the
tare weight (Tare
Subtraction).
¼0»
NET
kg
0. 0 0 0
T T
7. Remove 50g form platform
and press [T] key to clear the
Tare value.
1.5.2.2 Digital Tare
Note: To enable this function, SPEC 27 bit 2 must set to "1" in advance.
OPERATION KEY DISPLAY
0. 020
T
1. At Weighing Mode, enter
tare weight by numeric key
(Ex. 20g).
¼0»
¼T» NET
kg
- 0. 0 2 0
T T
2. Press [T] key to subtract the
tare weight.
0. 050
T
3. Enter the tare weight by
numeric key (Ex. 50g).