- 26 -
DI-80 USER MANUAL
1.10.2 Multiple Items Transaction
Following operation is examples showing how to operate two or more items for accumulate or subtract to issuing a receipt or
total label in Weighing Mode or Counting Mode. To enable this function, SPEC 13 bit 0: ALLOW PLU CALLING WHEN
MEMORY FLAG SET MUST set to "1" in advance.
1.10.2.1 Weighing Mode
For example: Accumulate 50kg of PLU 123 by key-in, 20kg of PLU 5 by weighing, 35.5kg of PLU 1 by key-in and deducts 5kg
of PLU 5 by Weighing.
OPERATION KEY DISPLAY
¼0»
NET
kg
0. 0 0 0
S T E A T I T E - C 3 H 5
T
1. At Weighing Mode, enter the
existing PLU Number by
numeric key (Ex. 123) and
press [PLU] key.
5 0. 000
T
2. Enter knowing weight for the
product by numeric key (Ex.
50kg).
NET
kg
tot A L
W E I G H T 5 0 . 0 0 0
T T
3. Press [+] key.
Memory lamp light up.
Build-in Printer will start
printing if it connected and
label also be issue if machine
connect to Barcode Printer.
Refer to Note 1.
¼0»
NET
kg
0. 0 0 0
S E M B ( S U S ) M 9 x 1
T T
4. Press [5] and [PLU] key to
called up PLU 5.
Auto exit from Add. Mode
can be set at SPEC 32 bit 1.
NET
kg
20.0 0 0
S E M B ( S U S ) M 9 x 1
T
T T
5. Place the product on the
platter (Ex. 20kg).
Note 1: Label issue from Barcode Printer or Data send to PC only when [PRINT] key is depressed can be set at SPEC 19 bit 0.
To Next Page
Loading...
Need help?
General
