Digi DI-80 User Manual

- 21 -
DI-80 USER MANUAL
1.9.2 Counting Mode
There has to ways for Single transaction to issue receipt (Build-in Printer) or label (Barcode Printer) in Counting Mode, by place
the product on the platter or by enter the knowing quantity of the product.
OPERATION KEY DISPLAY
¼0»
NET
kg
0. 0 0 0
2. 0000 0
T
Pcs
1. At Weighing Mode, enter the
existing PLU Number by
numeric key (Ex. 123) and
press [PLU] key.
NET
kg
5. 0 0 0
2. 0000 2500
T
T
Pcs
2. Place the product on the
platter (Ex. 5kg).
NET
kg
5. 0 0 0
2. 0000 2500
T
T
Pcs
3. Press [¾] key to issue a
receipt.
 Build-in Printer will start
printing and label also be issue
if machine connect to Barcode
Printer.
 Press [¾
] key again will
issue another receipt or label
without removing weight from
platter.
1 00000
T T
4. Enter the knowing quantity
of the product by numeric
key (Ex.100000Pcs).
 Maximum 9999999 can be
entering.
NET
kg
5. 0 0 0
2. 0000 2500
T
Pcs
5. Press [¾] key to issue a
receipt.
 After complete issuing
receipt, remove the product
from the platter and press [C]
key to clear the PLU.

Digi DI-80 Specifications

General

Brand	Digi
Model	DI-80
Category	Scales
Language	English