Services Location information
IX14 User Guide
376
factory default if its location service indicates that it has been moved outside of the geofence.
Multiple geofences can be defined for one device, allowing for a complex configuration in which
different actions are taken depending on the physical location of the device.
Required configuration items
n
Location services must be enabled.
n
The geofence must be enabled.
n
The boundary type of the geofence, either circular or polygonal.
l
If boundary type is circular, the latitude and longitude of the center point of the circle, and
the radius.
l
If boundary type is polygonal, the latitude and longitude of the polygon's vertices (a vertex
is the point at which two sides of a polygon meet). Three vertices will create a triangular
polygon; four will create a square, etc. Complex polygons can be defined.
n
Actions that will be taken when the device's location triggers a geofence event. You can define
actions for two types of events:
l
Actions taken when the device enters the boundary of the geofence, or is inside the
boundary when the device boots.
l
Actions taken when the device exits the boundary of the geofence, or is outside the
boundary when the device boots.
For each event type:
l
Determine if the action(s) associated with the event type should be performed when the
device boots inside or outside of the geofence boundary.
l
The number of update intervals that should take place before the action(s) are taken.
Multiple actions can be configured for each type of event. For each action:
l
The type of action, either a factory erase or executing a custom script.
l
If a custom script is used:
o
The script that will be executed.
o
Whether to log output and errors from the script.
o
The maximum memory that the script will have available.
o
Whether the script should be executed within a sandbox that will prevent the script from
affecting the system itself.
Additional configuration items
n
Update interval, which determines the amount of time that the geofence should wait between
polling for updated location data.
WebUI
To Next Page
Loading...
Need help?
General
