Initial configuration Configure system settings
IX14 User Guide
55
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System.
4. Provide the system information settings:
n
Name: (Optional) Enter a name for the device. The name will appear in log messages
and at the command line prompt.
n
Contact: (Optional) Enter a contact for the device.
n
Location: (Optional) Enter a location for the device.
n
Description: (Optional) Enter a description for the device.
n
Banner: (Optional) Enter banner text to appear when a user logs into the device.
5. Expand Scheduled tasks:
n
Reboot time: (Optional) If you want to reboot the system daily, enter the time for the
daily reboot.
n
Expand System maintenance.
l
Start time/Duration window: Enter a start time and duration window for system
maintenance.
l
Frequency: Enter the frequency for the maintenance window.
l
Select Modem firmware update to enable the update of modem firmware during
the maintenance window.
6. If you want to add Custom scripts, click and configure the script. See Schedule system
maintenance tasks for more information.
7. Configure Time:
n
Time > Timezone: Select the timezone for the IX14.
n
NTP servers: If you want to add an NTP server, click and specify the URL for the
server.
To Next Page
Loading...
Need help?
General
