Revision history—90002291
IX14 User Guide
6
Revision Date Description
l
Changed default IPsec IKE DH group to 14 for
enhanced compatibility with industry standard
settings.
n
Location services enhancements:
l
New option for Location service to specify the
talker ID used in NMEA mesage strings.
l
Include the mode indicator field in NMEA messages
constructed when a GPS fix isn’t obtained.
n
SureLink enhancments:
l
Added new settings under cellular Surelink options
to have the device reset the cellular modem if a
specified number of Surelink tests fail
l
Added show surelink Admin CLI command.
n
Serial port enhancements:
l
New option to add and configure an external USB-
to-serial adapter.
l
Disable serial history in remote access mode by
default.
n
Support for sending analog and digial I/O health
metrics to Digi Remote Manager.
n
Added show containers Admin CLI command.
M March 2022
Release of Digi IX14 firmware version 22.2:
n
VPNenhancements:
l
Renamed VPN > IPsec > Tunnels > Policies > Local
network setting to Local traffic selector and
added Remote traffic selector.
l
Added a Dynamic option to the Local traffic
selector to configuration of a local network by
protocol and/or port instead of a network address
range.
l
Added Protocol and Port match criteria for Local
traffic selector and Remote traffic selector.
l
Added VPN > IPsec > Advanced > Debug level to
specify the logging verbosity of IPsec messages in
the device system logs.
n
Enhancements to communications with Digi Remote
Manager:
l
Enhanced security for communications with Digi
Remote Manager by using client-side certificates.
l
The default URL for the device's Remote Manager
connection is now edp12.devicecloud.com. This
To Next Page
Loading...
Need help?
General
