Interfaces Wireless Wide Area Networks (WWANs)
IX14 User Guide
74
(config network interface my_wwan ipv4 surelink target 0)> http_
url value
(config network interface my_wwan ipv4 surelink target 0)>
where value uses the format http[s]://hostname/[path]
n
interface_up: The interface is considered to be down based on the interfaces down
time, and the amount of time an initial connection to the interface takes before this test
is considered to have failed.
l
(Optional) Set the amount of time that the interface can be down before this test is
considered to have failed:
(config network interface my_wwan ipv4 surelink target 0)>
interface_down_time value
(config network interface my_wwan ipv4 surelink target 0)>
The default is 60 seconds.
l
(Optional) Set the amount of time to wait for an initial connection to the interface
before this test is considered to have failed:
(config network interface my_wwan ipv4 surelink target 0)>
interface_timeout value
(config network interface my_wwan ipv4 surelink target 0)>
The default is 60 seconds.
l
other: Allows you to test another interface's status, to create a failover or coupled
relationship between interfaces:
(config network interface my_wwan ipv4 surelink target 0)> other
value
(config network interface my_wwan ipv4 surelink target 0)>
If other is set:
o
Set the alternate interface to be tested:
i. Use the ? to determine available interfaces:
(config network interface my_wan ipv4 surelink target
0)> other_interface ?
Interface: The network interface.
Format:
/network/interface/defaultip
/network/interface/defaultlinklocal
/network/interface/lan
/network/interface/loopback
/network/interface/modem
Current value:
(config network interface my_wan ipv4 surelink target
0)> other_interface
To Next Page
Loading...
Need help?
General
