DigiDesign Digi 002 User Manual

Chapter 9: Using Digi 002 as a Stand-Alone Mixer 107
Dynamics Controls
To access Dynamics controls for a track:
1 Press the Dynamics switch in the Channel
View area above the Channel Scribble Strips.
2 Press the Channel Select switch on the chan-
nel whose Dynamics controls you want to dis-
play.
The onboard compressor controls are distrib-
uted across the Channel Scribble Strips as shown
in Table 11. The second row of the table shows
the function of the Rotary Encoders, and the
bottom row of the table shows the function of
the Channel Select switches in this view.
3 When you are finished setting the Dynamics
controls, return to Home View by pressing the
Pan switch in the Console View area.
You can bypass Dynamics processing at any
time by pressing the Master Bypass switch in the
Channel View area. The Master Bypass switch
bypasses compression for the selected channel.
To bypass Dynamics controls for a track:
1 Press the Dynamics switch in the Channel
View area above the Channel Scribble Strips.
2 Press the Channel Select switch on the chan-
nel whose Dynamics controls you want to by-
pass.
3 Press the Master Bypass switch. The switch
flashes to indicate that the displayed compres-
sor is currently bypassed.
Table 11. Compressor controls in Digi 002 Stand-alone mode
Display
Inpt Thsh Rtio Atck Rels Knee Phas Outp
Rotary
Encoder
Input
Gain
Threshold Compres-
sion Ratio
Attack
Time
Release
Time
Knee Type Phase
Invert
Output
Gain
Channel
Select
Toggle Hard
and Soft
Knee
Toggle Nor-
mal and
Invert

DigiDesign Digi 002 Specifications

General

Brand	DigiDesign
Model	Digi 002
Category	Musical Instrument
Language	English