DigiDesign Digi 002 User Manual

Getting Started with Digi 002 & Digi 002 Rack122
What are the Limitations of
the Digidesign CoreAudio
Driver?
The Digidesign CoreAudio Driver has the fol-
lowing limitations:
◆ Pro Tools is not a CoreAudio application and
therefore requires exclusive access to Digidesign
hardware. You cannot use CoreAudio applica-
tions and Pro Tools at the same time. To use
Pro Tools, make sure you quit any CoreAudio
applications before starting Pro Tools. To use a
CoreAudio application, make sure you quit
Pro Tools before starting any CoreAudio appli-
cation.
◆ The Digidesign CoreAudio Driver cannot be
used to preview sound files from the Finder.
When a sound file is located in the Mac OS X
navigation window, a QuickTime transport bar
is displayed next to it. The QuickTime transport
bar lets you audition the sound file. The sound
will always play back though the Macintosh’s
built-in audio controller (through the Macin-
tosh’s speaker or headphone jack). However, if
you double-click a sound file, the QuickTime ap-
plication will launch, and can use the Digi-
design CoreAudio Driver for playback.
◆ The Digidesign CoreAudio Driver cannot be
used for playback of System Sounds.
Compatibility
This version of Digidesign CoreAudio Driver can
be used on Digidesign-qualified Pro Tools sys-
tems running on Macintosh, or it can be used as
a stand-alone driver on Digidesign-qualified
Macintosh systems that do not have Pro Tools
installed.
Compatible Software
For a list of CoreAudio Driver-compatible soft-
ware, refer to the Digidesign Web site
(www.digidesign.com/compato).
Digidesign can only assure compatibility and
provide support for hardware and software it
has tested and approved.
For a list of Digidesign hardware systems, Digi-
design-qualified computers, operating systems,
and devices, and Digidesign-qualified third-
party CoreAudio-compatible applications, refer
to the compatibility page of the Digidesign Web
site (www.digidesign.com/compato).
Installing the Digidesign
CoreAudio Driver
The CoreAudio Driver is installed by default
when you install Pro Tools.
Stand-Alone CoreAudio Driver Installer
This version of Digidesign CoreAudio Driver can
be installed on Digidesign-qualified Pro Tools
systems running on Macintosh (for example, if
the CoreAudio Driver was uninstalled), or it can
be installed as a stand-alone driver on Macin-
tosh systems that do not have Pro Tools in-
stalled.
For detailed information on installing and
configuring CoreAudio Driver on systems
with or without Pro Tools, see the electronic
pdf of the CoreAudio Usage Guide.

DigiDesign Digi 002 Specifications

General

Brand	DigiDesign
Model	Digi 002
Category	Musical Instrument
Language	English