Appendix G: Digi 002 Stand-Alone Block Diagram 137
appendix g
Digi 002 Stand-Alone Block Diagram
The diagram on the following pages shows the
basic signal flow of Digi 002 in Stand-alone
mode.
The diagram shows the Digi 002 mixer divided
into two sections, with the first page showing
Input Channels 1–4, the second page showing
Input channels 5–8 and the Master Faders, Effect
Returns, and Outputs. The two sections share
the four send busses (A–D), the main stereo bus
(L–R), and the ADAT Optical output bus (ADAT
1–8).
This signal flow diagram is not a detailed
circuit diagram or wiring schematic. It is in-
tended to provide an overview of the mixer
functions of Digi 002 in Stand-alone mode
only.