Digifly AIR-BT - Page 76

AIR_Manual_506a_ENG_rev_1.pdf Page 76/96
15
LIVE TELEMETRY with the integrated Digi-FLYBOX
 The Digifly AIR integrates the
Digi-FLYBOX
which is a real-time Telemeter:
with this fantastic feature, the AIR sends its Telemetry (all the information from its high quality sensors), in real
time at a continuous high speed of 10 times per second via USB cable or Bluetooth, to external devices such as
E-Reader, Smartphone, Tablet, etc. that have a software compatible to receive, decode and display the Digifly’s
Telemetry such as LK8000, XCSoar, XCTrack, Top Hat, GpsDump, TTLiveTrack24 (see paragraphs 15.2, 15.3,
15.4, 15.5, 15.6, 15.7 for more details about these programs).
The
Digi-FLYBOX
is one of those characteristics of your AIR that marks that difference among flight instruments,
making it unique and unbeatable when it comes to Quality/Features/Price!
• This information (Telemetry) can also be used to
live track
to any server using, for example, GPSDump (see
15.6) or TTLiveTrack24 (see 15.7) on an Android Smartphone.
• The most important data sent by the real-time telemetry is :
Barometric Altimeters, GPS Altitude, GPS Ground Speed, IAS/TAS Air speed (Pitot Tube), Variometer assisted by
the AHRS Inertial Platform, GPS Position, etc.
15.1
ACTIVATING THE DIGIFLY’S TELEMETRY DATA OUTPUT Digi-FLYBOX
 To activate the Digifly’s telemetry data output you have to select the telemetry data type you want to transmit
(parameter
ADVANCED SETUP \ n. 25 TELE
) then select USB cable or Bluetooth mode (parameter
ADVANCED
SETUP \ n. 26 BLUT
).
To set these 2 parameters correctly, follow the instructions found in the corresponding sections that talk about
the different software compatible with the Digifly’s Telemetry:
o
LK8000
(see paragraph 15.2)
o
XCSoar
(see paragraph 15.3)
o
XCTrack
(see paragraph 15.4)
o
Top Hat
(see paragraph 15.5)
o
GpsDump
(see paragraph 15.6)
o
TTLiveTrack24
(see paragraph 15.7)