14
Optimized layout for A4 print.
TECH_MAN_ENG_DGT4X
Technical features
POWER SUPPLY 12 - 24 Vdc LPS or with class 2 power supply.
MAXIMUM ABSORPTION
(without load cells)
DGT4X: 4 W
DGT4XAN: 4.5 W
DGT4XPB: 4.5 W
DGT4XETHIP, DGT4XPRONET, DGT4XETHCAT, DGT4XMODTCP: 7.5 W
DGT4COPEN, DGT4DEVNET: 4.5 W
OPERATING TEMPERATURE From -10°C to +40°C.
DISPLAY DIVISIONS 10000e, 2 x 3000e for legal weighing, expandable up to 800,000 for internal use (with a
minimum cell signal of 1.6 mV/V).
CONVERSION SPEED Up to 2600 conv. / sec with single channel.
Up to 100 conv. / sec with 4 channels.
MINIMUM VOLTAGE PER DIVISION 0.3 µV (approved transmitter); 0.03 µV (non-approved transmitter).
COUNTING RESOLUTION 1,500,000 points (with input signal 3 mV/V).
DISPLAY 6 digits, h 14.2 mm (0.56").
SIGNALS 9 status indicator LED lights.
KEYPAD mechanical with 5 keys.
TARE FUNCTION Subtraction possible over the entire range.
LOAD CELL POWER SUPPLY 5 Vdc, 230 mA.
LOAD CELL CONNECTION 6 wires (CELL1) with sense, 4 wires (CELLS 2, 3, 4).
CONNECTABLE CELLS Up to 16 350 cells.
CASE Made of plastic (self-extinguishing PPO), suitable for DIN rail mounting (EN 60715 - DIN43880)
or wall mounting.
SERIAL OUTPUTS 1 half duplex RS485 bidirectional port on terminal.
1 RS232 bidirectional port on terminal;
1 PROFIBUS port on DB9 connector (DGT4XPB* version);
2 ETHERNET ports (versions DGT4XETHIP*, DGT4XMODTCP*, DGT4XETHCAT*,
DGT4XPRONET*);
1 CANOPEN port on 5-pole terminal (DGT4XCANOP* version);
1 DEVICENET port on 5-pole terminal (DGT4XDEVNET* version).
1 USB port (micro USB type B) on front panel → Virtual COM (Device).
* Fieldbus models are not equipped with port 232.
OUTPUTS / INPUTS 2 photomosfet NO or NC outputs:
max 60 Vdc 0.5 A max / 48 Vac 0.5A;
2 configurable inputs (bidirectional optocouplers): 12 - 48 Vdc;
Input reading and output update time: 1 msec;
16-bit analog output (DGT4XAN version).
Current: 0 - 20 mA / 4 - 20 mA. Voltage: 0 - 5 Vdc, 0 - 10 Vdc.
The maximum applicable resistance on the current output is 300 Ω
while the minimum applicable resistance on the voltage output is 1 kΩ.
LOAD CELL SENSITIVITY Maximum sensitivity of the connectable load cells: 6 mV/V.
FIELDBUS UPDATE RATES Up to 120 Hz.
CERTIFICATIONS Indicated on the EC Declaration of Conformity of the product.
To Next Page
Loading...
Need help?
General
