Dini Argeo DGT4X Technical Manual

62
Optimized layout for A4 print.
888888
TYPE
A
888888
Setup
C
ConfiG
1
defau
8
day
month
year
hour
minute
i
TYPE
A
888888
F.mode
C
funCt
1
CloCk
4
TECH_MAN_ENG_DGT4X
MENU ACCESS:
SAVING THE PARAMETERS:
Press the key during the start-
up procedure.
Press the key several times, until the display shows
SAVE?. Press the key to confirm.
Complete menu
on pages 24 - 25
Restoring factory settings
The transmitter is initialized and the default parameters (indicated by the symbol) are activated. Pressing
the display shows “dflt?” confirm further with or exit by pressing another key.
The actual activation of the default parameters is performed by saving the settings (save?) while exiting the menu.
Date and time setting
Set the day and press .
Visible only with optional clock card
Set the month and press .
Set the year (with two digits) and press .
Set the hour and press . The time format is 24h.
Set the minutes and press .
The date and time format is: DD/MM/YY, HH:MM:SS (24h),

Dini Argeo DGT4X Specifications

General

Brand	Dini Argeo
Model	DGT4X
Category	Transmitter
Language	English