Dini Argeo DGT4X Technical Manual

39
Optimized layout for A4 print.
DISAB
ENAB
Type
A
888888
F.mode
C
funCt
1
rs.tare
5
TECH_MAN_ENG_DGT4X
LEGEND:
Indicates repeated pressing of
the key.
Parameter visible only
under certain conditions.
Parameter or menu subject
to approval.
Default value of the parameter.
Predetermined tare
Clearing the tare
By holding down the key, or by means of the predetermined tare command, it is possible to enter a tare value manually.
For a moment the display shows “-tm-” and shows the tare present (or 0 if no tare is present).
Enter the tare value and press to confirm.
The tare can be cleared in dierent ways:
• By unloading the scale and performing a semi-automatic tare.
• By entering a predetermined tare value of 0.
• If the weight is negative, pressing the key.
Restoring the tare
Restoring tare disabled.
Restoring tare enabled. When restarting, the last tare in the memory
before turning o the power is restored.

Dini Argeo DGT4X Specifications

General

Brand	Dini Argeo
Model	DGT4X
Category	Transmitter
Language	English