DINO 210XT
10
REGULAR INSPECTION
A thorough inspection of the lift must be carried out at least once every twelve (12) months.
The inspection shall be carried out by a technically trained person who is familiar with the operation
and structure of the lift.
Draw up a protocol of the inspections and keep it always with the unit stored in the space reserved
for it.
Carry out he inspections on regular basis throughout the service life of the lift.
The inspection must be carried out within twelve (12) months from the first or the previous
inspection.
If the lift is used under extreme conditions, intervals between the inspections shall be reduced.
The overall operating condition of the lift as well as the condition of the safety-related control
devices shall be established in the regular inspections. Particular attention shall be paid to changes
which affect the operational safety.
In connection with the regular inspection, it shall be established to what extent the lessons and
practical experience gained from the previous inspection can be implemented for even better safety.
ATTENTION! Primarily the national legislation must be followed!
Regular inspections and service measures are described more thoroughly in the chapter "Service-
and maintenance".
To Next Page
Loading...