DINO 210XT
42
INSTRUCTIONS FOR SERVICE AND MAINTENANCE
GENERAL SERVICE INSTRUCTIONS
- carry out the servicing and inspection of the lift in accordance with the instructions
- when it comes to more demanding repair works turn to a specialist or contact the distributor
or the manufacturer of the lift
- do not modify the lift without written consent from the manufacturer
- any such faults which may affect the operational safety of the unit must be repaired before
the lift is next used
- do not let oil spill on the ground
- keep the lift clean, especially the platform
- clean up the lift before service and inspection
- use genuine spare parts
- support the platform, boom system and support outriggers in a position in which the load
does not rest on the structure under repair or cause any other danger (e.g. transport position
or use of supporting structures)
- the device may be lifted with two slings, each with a load-carrying capacity of at least 2 500
kg or slinging at the four lugs (see picture)
Be careful not to damage the device during the lifting!
250 mm
To Next Page
Loading...