DINO 210XT
39
MEASURES TO BE TAKEN AT THE END OF THE WORKING DAY
1. Retract the telescope boom completely.
2. Check that the platform is perpendicular to the boom.
3. Lower the boom/platform onto the support on the tow-bar.
- the limit switch on the transport support prevents operation of the support outriggers if
the platform is not down
4. Close the cover on the platform control panel.
5. Turn the selector switch to position 0 and turn off the mains switch.
6. If you want to charge the battery, keep the mains cable connected, otherwise disconnect the
lift from the mains supply.
7. Make sure that the covers are locked.
To Next Page
Loading...