DINO 210XT
36
DRIVING DEVICE
The hydraulic driving device is intended for moving the lift within the work area if the towing
vehicle cannot be used.
- start the aggregate and adjust the engine speed to ¾ of the maximum (petrol engine).
The running speed of the aggregate affects the driving speed.
- turn the selector switch 1 outriggers to position (1)
- make sure that the platform is in the transport position and the outriggers are in the upper
position
- make sure that the mains cable is long enough to cover the whole travel distance (power
supply from mains)
- press the driving device against the wheel
To Next Page
Loading...