Dino 210XT - Chassis Control Switches

DINO 210XT
86
CHASSIS CONTROL CENTRE (LCB), SWITCHES
S1: LOCKING EMERGENCY STOP SWITCH
Stops all other functions except the emergency descent and the sound signal, which remain
operational.
S2: START SWITCH
Controls the contactor of the electric motor and start solenoid of the combustion engine if the
combustion engine is used.
S3: STOP SWITCH
Disconnects the control voltage from the control contactor of the electric motor and the stop
relay of the combustion engine.
S13:START SWITCH FOR EMERGENCY DESCENT
Controls the solenoid for the emergency descent unit which starts the unit and supplies the
control voltage to the control levers while the the emergency descent system is in operation.
S16: TURNING OF THE BOOM TO THE RIGHT - LEFT
Non-locking lever switch (chassis control panel).
S17: BOOM UP-DOWN
Non-locking lever switch (chassis control panel).
S18: TELESCOPE IN-OUT
Non-locking lever switch (chassis control panel).
S19: ARTICULATED ARMS DOWN-UP
Non-locking lever switch (chassis control panel).
S20: PLATFORM LEVELLING FORWARD-BACKWARD
Non-locking lever switch (chassis control panel).
S32: TELESCOPE IN
Non-locking button switch. After the SR3 has tripped, the telescope can be retracted by
depressing the button.
S40: COMBUSTION ENGINE CHOKE
Non-locking button switch. Depressing the button activates the combustion engine choke.