DINO 210XT
89
PLATFORM CONTROL CENTRE (UCB), SWITCHES
DMK: DEAD-MAN-SWITCH
JST: JOYSTICK
As the right side of the rocker switch is depressed, the movements are: boom up - down and turn
right - left.
As the left side of the rocker switch is depressed, the movements are: telescope out - in and
articulated arms up - down.
S4: LOCKING EMERGENCY STOP SWITCH
Stops all other functions except the emergency descent and the sound signal, which remain
operational.
S5: STOP SWITCH
Disconnects the control voltage from the control contactor of the electric motor and the stop relay of
the combustion engine.
S6: START SWITCH
Controls the contactor of the electric motor and start solenoid of the combustion engine if the
combustion engine is used.
S10: SOUND SIGNAL SWITCH
S11: EMERGENCY DESCENT SWITCH
Controls the solenoid for the emergency descent unit which starts the unit and supplies the control
voltage to the control levers while the the emergency descent system is in operation.
S12: PLATFORM LEVELLING FORWARD-BACKWARD
Control switch, non-locking lever switch.
The levelling is operated by pressing the button S29 and tuning the lever switch S12.
S29: SELECTOR SWITCH FOR LEVELLING AND TURNING OF PLATFORM
Non-locking button switch.
Switches on the control voltage to the switches S12 and S36 as the button is pressed.
S31: TELESCOPE IN
Non-locking pushbutton for retraction of the telescope.
S36: PLATFORM TURN TO LEFT AND RIGHT
Non-locking lever switch.
Controls the relays K14 and K15.
The turning is operated by pressing the button S29 and turning the lever switch S36.
S41: COMBUSTION ENGINE CHOKE
Non-locking button switch. Depressing the button activates the combustion engine choke.
To Next Page
Loading...