Need help?Do you have a question about the Dino 210XT and is the answer not in the manual?
General| Brand | Dino |
|---|---|
| Model | 210XT |
| Category | Lifting Systems |
| Language | English |
Safety limit switch RK3 prevents outrigger/drive operation if boom not on support.
Outriggers must be in support position before lifting boom. Wheels off ground. Switches RK11-RK14 on outriggers.
Switches prevent overloading. RK4 stops extension/lowering. RK5 backup. Lights indicate status.
Emergency stop button stops all movements and turns off power. Needs to be pulled up to restart.
Details of controls on the chassis panel like selector switch, start/stop buttons, signal lights.
Ensure even, hard ground for stable support. Table of soil materials and pressure.
Connecting mains power, voltage, frequency, and fuse requirements.
Using the engine for power, starting procedure, choke, starter grip.
Starting the engine with the green button.
Lowering front and rear outriggers and ensuring they are supported.
Leveling the chassis using the level gauge.
Testing the operation of the overload limit switch RK4.
Procedures to follow if overloading has occurred.
Moving the platform, avoiding damage to jockey wheel, and general operation.
Steps to take at the end of the working day.
Safety reminders when moving the platform.
Adjusting platform position using chassis controls.
Adjusting platform position using platform controls.
Components of the emergency descent system: battery, recharger, hydraulic unit.
Battery recharger features, charging voltage, current, and topping up water.
Components of the hydraulic unit: pressure relief valve, check valve, motor.
Restrictions on driving downhill and on slopes due to inclination.
Checks and safety measures before driving, including chocks and handbrake.
Safety precautions during transfer using the driving device.
To Next Page