Dino 210XT - End of Day and Moving Procedures; End of Working Day Measures; Platform Moving Safety

DINO 210XT
31
- when the weather is cold, it is recommended to let the engine run to keep the hydraulic oil
warm
- It is recommended to also leave the combustion engine running between the operations, to
ensure the battery remains well charged
- check the stability and condition of the base regularly during the operation, taking into
account the weather and ground conditions
- the electric timer of the lift automatically disconnects the supply voltage (12 VDC) 1 hour
after the last time the electric or combustion engines were in operation
Re-activate the power supply by pressing the start button either on the chassis control panel
or on the platform control panel.
19. When moving the platform, remember the following
- be careful of the high voltage power lines
- do not exceed the max. allowed lateral force (400N)
- do not touch open electric wires
- do not throw objects from the platform
- do not damage the lift
- do not take additional load in the upper position
- do not damage other devices
- do not load the platform vertically more than what is
allowed
20. When leaving the lift
- drive the lift to a safe position, preferably to the
transport position
- switch off the power unit
- prevent unauthorized use of the lift by locking the control centre cover