Dino 210XT - Braking System Irregularities; Reversing and Engine Speed Brake Issues

DINO 210XT
79
FAULT REMEDY
20. Braking uneven and jerky
Too much play in the brake system. Adjust the brakes (refer to page 47).
Shock absorber of the overrun device faulty. Replace the shock absorber.
Reverse automatics - brake-shoe jams in the
carrier.
Replace the brake-shoe in the carrier.
21. The brakes drag (only one of the wheels brakes)
Brake units wrongly adjusted. Readjust the brake units according to
instructions.
Also refer to point 17 for possible cause.
22. Lift brakes as the engine speed is decreased
Shock absorber of the overrun device faulty. Replace the shock absorber.
23. Reversing forced or impossible
Brakes have been adjusted too tight. Adjust the brake system as instructed on page
47.
24. Wheel brakes overheat
Brake system wrongly adjusted. Adjust the brake system as instructed on page
47.
Wheel brakes dirty. Clean the wheel brakes.
Overrun brake - force transmission lever jams. Dismantle, clean and lubricate the transmission
rod.
Parking brake not completely released. Release the parking brake completely.