DINO 210XT
27
Note! If you have levelled the chassis of the lift ON A GRADIENT turn around the boom
carefully to make sure that the turning device does not bang against the support outriggers.
5. turn the boom to the side to enable its lowering
6. extend the telescope as much as necessary to ensure safe entrance on the platform
DO NOT DAMAGE THE TOW-BAR JOCKEY WHEEL!
The boom movements are noticeably slower when the emergency descent system is used.
The speed of the boom movements cannot be adjusted continually with the control levers when the
lift is operated from the chassis control panel.
Lock the selector switch (1) in position 1 (support outriggers) before working under the boom.
Make sure that neither people nor load are on the platform.
To Next Page
Loading...