Dionex UltiMate 3000 - Page 58

UltiMate 3000 RSLCnano – Standard Applications
57
Table 13: Matrix for connection tubing for the UltiMate 3000 RSLCnano system
Length (mm)
ID
[Color code]
20 µm
[Orange]
50 µm
[Brown]
75 µm
[Black]
100 µm
[Red]
150 µm
[Purple]
70 6041.5120 6041.5123 6041.5126 6041.5810 6041.5817
150 6041.5121 6041.5124 6041.5127 6041.5811 6041.5818
250 - - 6041.5730 6041.5812 6041.5819
350 6041.5240 6041.5540 6041.5735 6041.5813 6041.5820
450 - - - 6041.5814 6041.5821
550 6041.5260 6041.5560 6041.5760 6041.5815 6041.5822
650 6041.5275 6041.5575 6041.5775 - -
750 6041.5280 6041.5580 6041.5780 6041.5816 6041.5823
950 6041.5122 6041.5125 6041.5128 - -
Table 14: List of connection tubing for the UltiMate 3000 RSLCnano system
Item P/N
Sample loops
Sample loop 1 μL with nanoViper fittings connections 6826.2401
Sample loop 5 μL with nanoViper fittings connections 6826.2405
Sample loop 20 μL with nanoViper fittings connections 6826.2420
Sample loop 50 μL with nanoViper fittings connections 6826.2450
Connectors
Nano connector including connection sleeves 6720.0390
Sleeve for Nano Connector, 5 pcs. 6720.0391
PTFE tubing, 250 µm I.D., for low pressure connection of 280 µm O.D. FS. capillaries,
5 pcs.
160486
Microtight Union including 2 fittings and 1 gauge plug 161497
PEEK sleeves, precision cut and polished for connections with Microtight Union (280 µm
O.D.), 10 pieces
161498
PEEK sleeves, precision cut and polished for connections with Microtight Union (380 µm
O.D.), 10 pieces
161405