To Next Page

To Previous Page

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual

aircraft will automatically take o according to the preset task plans, and the media les will be

automatically uploaded to DJI FlightHub 2. Users can also gain control and control the aircraft,

gimbal, and payload remotely. During operation, livestreams, and real-time device information

can be viewed remotely to monitor the operation site. Users can also perform remote

debugging, making device management more convenient.

[1] In an environment with good network connection, it takes approximately 45 seconds at the fastest from

when the operator clicks Take O in DJI FlightHub 2 to when the aircraft leaves the landing pad. This value

is for reference only, and the actual experience may vary.

dji MATRICE 3D Series Flight Manual

Other manuals for dji MATRICE 3D Series