EasyManua.ls Logo

dji MATRICE 3D Series - Radio Frequency Environment; Use of Takeoff and Landing Equipment; Distance to Control Station

dji MATRICE 3D Series
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.   
61
Flight Restrictions DJI FlightHub 2 Prompt
Max Flight
Altitude
Aircraft cannot exceed the max
flight altitude value set in DJI
FlightHub 2.
Flight route altitude is greater than
the max altitude, the dock is unable to
perform ight task.
Max Distance The straight-line distance from the
aircraft to the Home Point cannot
exceed the max ight distance set
in DJI FlightHub 2.
Flight route distance is greater than
the max distance, the dock is unable
to perform ight task.
The aircraft cannot take o when the GNSS signal is weak.
For safety reasons, DO NOT y the aircraft close to airports, highways, railway stations,
railway lines, city centers, or other sensitive areas.
Open the DJI FlightHub 2 Project page, click > to manage the custom ight areas
(user-dened operation zones) and custom GEO Zones (user-dened no-y zones), or
import obstacle data. The aircraft can bypass custom GEO Zones and the imported
obstacles during RTH or when performing FlyTo tasks.
Radio Frequency Environment
Be extremely alert when flying near areas with magnetic or radio interference. It is
recommended to connect the remote controller B during ight tests. Pay close attention to
the video transmission quality and signal strength on DJI Pilot 2. Sources of electromagnetic
interference include but are not limited to: high voltage lines, large-scale power transmission
stations or mobile base stations, and broadcasting towers. The aircraft may behave
abnormally or lose control when ying in areas with too much interference. Return to the
dock and land the aircraft, and only make future task plans when the ight test is stable.
Fly in wide open areas. Tall buildings, steel structures, mountains, rocks, or tall trees may
aect the accuracy of the GNSS and block the video transmission signal.
When using with multiple aircrafts, make sure that the distance between each aircraft is
more than 10 m to avoid interference.
Avoid interference between the dock and other wireless equipment. It is recommended to
power o nearby Wi-Fi and Bluetooth devices.
Use of Takeo and Landing Equipment
The dock can accommodate one aircraft, from where it can take o and land. The dock can also
charge the aircraft battery and provide a suitable environment for aircraft storage.
Distance to Control Station
When the user performs automated operations remotely using DJI FlightHub 2, the aircraft

Table of Contents

Other manuals for dji MATRICE 3D Series

Related product manuals