dji MATRICE 3D Series Flight Manual

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
86
©
2024 DJI All Rights Reserved.
Control Station Failures
Control station failures include the following situations.
Loss of Control Signal
If the control signal is lost during ight, the aircraft will perform signal lost action. Refer to the
RTH > Advanced RTH > Trigger Method, and then the Loss of Control Signal section for more
information.
DJI FlightHub 2 Failure
If DJI FlightHub 2 crashes during automatic operations while the control signal is normal, the
C2 link between the aircraft and the control station is still in good condition, so the aircraft will
continue performing the current operation until RTH is triggered by low battery level.
Alternate Landing
If the dock is determined unsuitable for landing, alternate landing will be triggered. The aircraft
will ascend to the alternate route altitude, then y to the alternate landing site for landing. Open
DJI FlightHub 2, Click Devices > Dock, and then to check the alternate route altitude.
1. RTH Altitude
2. Alternate Route Altitude
3. Alternate Landing Site
1
2
3
• To ensure flight safety, make sure to set an alternate landing site and suitable
alternate route altitude when conguring the dock.

dji MATRICE 3D Series Specifications

General

Brand	dji
Model	MATRICE 3D Series
Category	Drones
Language	English