To Next Page

To Previous Page

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual

After the motors start, the front LEDs will blink red and green alternately and the aircraft status

indicators will blink green. The green lights indicate the aircraft is a UAV and the red lights

indicate the heading and position of the aircraft.

• To obtain better footage, the front LEDs will turn off automatically when taking

photos or videos by default. Front LED settings can be modied in DJI Pilot 2. Lighting

requirements vary depending on the region. Observe local laws and regulations.

Beacon and Auxiliary Light

Beacon

The beacon on the aircraft allows users to nd the aircraft when ying at night. The beacon can

be enabled/disabled in DJI FlightHub 2 > Devices > Dock > Device Maintenance.

• DO NOT look directly at the beacon when it is in use to avoid eye damage.

Auxiliary Light

The auxiliary light is located at the bottom of the aircraft and will automatically turn on in low-

light environments to assist the downward vision system.

• The auxiliary light will automatically turn on in low-light environments when the ight

altitude is under 5 m. Note that the positioning performance of the vision system may

be aected. Fly with caution if the GNSS signal is weak. Pay attention to the dock and

the aircraft livestream.

dji MATRICE 3D Series Flight Manual

Other manuals for dji MATRICE 3D Series