To Next Page

To Previous Page

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual

Users can open the DJI FlightHub 2 Devices page, click Dock > , and enable Remote

Debugging to start heating or cooling.

• To ensure the service life of the air conditioning system, a five-minute interval is

required when switching between cooling and heating operations. A countdown will

appear in DJI FlightHub 2. Wait for the countdown to end before switching operations.

Dock Network Connection

The dock can be connected to a wired network or 4G network

[1]

for internet access. Users can

choose dierent internet access based on actual needs. When the dock is connected to both a

wired network and a 4G network, the wired network will be used rst.

[1] 4G network service is not available in some countries or regions. Please consult your local DJI authorized

service providers or DJI Support for more information.

DJI FlightHub 2 (Information Display and User Interface)

DJI FlightHub 2 is a cloud-based aircraft task management platform, providing features such as

member, device, map photos, task area, ight route, and task plan management. By planning

ight routes on the web and distributing tasks to docks and supported aircraft, DJI FlightHub

2 makes remote access to real-time task information possible and improves team productivity

and eciency.

Note: The information on the webpage may vary in dierent versions.

Cloud Management

Organization and Project Management

Users can visit https://fh.dji.com to enter the DJI FlightHub 2 Organization page after logging in

with a DJI account. DJI FlightHub 2 supports centralized management for Projects, Members, and

Devices. Before rst use, please refer to DJI FlightHub 2 User Guide, and follow the instructions

to create an organization and a project, bind the dock and add members to a project, and

assign permissions to members.

dji MATRICE 3D Series Flight Manual

Other manuals for dji MATRICE 3D Series