dji MATRICE 3D Series - Post-Flight Inspection

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.
83
Post-Flight Inspection
1. Make sure that the aircraft has landed in the dock, and the dock covers are closed properly.
2. Make sure the media les are automatically uploaded to the cloud, and the media les can
be captured properly during ight.
3. Make sure to view the warning details of the dock and aircraft in DJI FlightHub 2.
4. Check if there is any error message in DJI FlightHub 2.
5. Check if the aircraft can be powered o and charged by the dock properly.
6. Check if the dock is working normally.
• Inspect the following items if the remote controller is used to take control of the
aircraft manually during on-site ight tests.
a. Make sure that the aircraft is powered o.
b. Check the aircraft structure, clean the dirt and dust, and replace any loose or
damaged parts.
c. Make sure the aircraft is placed properly on the landing pad and the aircraft
heading is consistent with the arrow mark, and the propellers are at 90° with each
other.
d. Make sure that the battery port on the aircraft is clean and dry.