dji MATRICE 3D Series Flight Manual

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
©
2024 DJI All Rights Reserved.
9
General Information and System Description
Introduction
DJI Dock 2 is a compact and high-performance, automated operation platform. The dock adopts
a lightweight design and can be carried by two people, and the highly integrated body design
allows quick installation and configuration. Dock site evaluation can be completed within 12
minutes with the help of vision evaluation technology. The dock can achieve a protection level
of IP55 (refer to IEC 60529 standard). The longest maintenance interval is six months.
[1]
The
dock comes with a quick-charging module and an air conditioning system, allowing it to cool
down and charge the battery in a short time. It takes approximately 32 minutes to charge the
battery from 20% to 90%.
[2]
DJI MATRICE
TM
3D Series aircraft is equipped with a six-directional vision system and an infrared
sensing system,
[3]
supporting RTH and obstacle sensing. The internal RTK facilitates accurate,
high-precision operations and meets the need of improved flight safety. The aircraft has a
protection level of IP54 (refer to IEC 60529 standard).
DJI FLIGHTHUB
TM
2 is a cloud-based aircraft task management platform, and can work with DJI
Dock 2 and DJI Matrice 3D Series aircraft to perform automated operations, achieving ecient
ight task and device management.
[1] Actual maintenance intervals should be determined based on the deployment environment and operating
frequency. It is recommended to conduct maintenance every six months or less.
[2] This data is from tests at a room temperature of 25° C (77 ° F) where the battery was charged from 20% to
90% when the aircraft was powered o, and should be used for reference only.
[3] The vision system and the infrared sensing systems are aected by surrounding conditions. Refer to the
Vision System and Infrared Sensing System section for more information.
Feature Highlights
Lightweight Design: DJI Dock 2 weighs approximately 34 kg and can be transported by two
individuals, signicantly increasing installation exibility while reducing installation costs.
Quick Takeo Ability: The dock integrates dual RTK modules, allowing the aircraft to quickly
take off without waiting for the RTK data to converge. A complete propeller inspection and
takeo happens all within approximately 45 seconds.
[1]
Gimbal Cameras: DJI Matrice 3D has a tele camera and a wide-angle camera with a mechanical
shutter, meeting the needs of high-precision mapping tasks. DJI Matrice 3TD has a wide-angle
camera, a tele camera, and an infrared camera and can depict both visible light and thermal
images, making it suitable for security and inspection operations.
The tele camera supports up to 56× Max Hybrid Zoom, allowing for a highly magnied zoom
view from a remote distance. The infrared camera and the tele camera of Matrice 3TD supports
28× continuous side-by-side zoom for easy comparison.
Cloud Mapping: DJI FlightHub 2 can generate high-precision 3D models based on the collected
flight data, restoring the operating environment authentically. Utilizing high-precision 3D
models, users can perform flight route editing from a first-person perspective and preview
simulated imaging results, enhancing ight route planning accuracy.
Cloud-Based Operation: DJI FlightHub 2 supports ight task planning, live ight controls, and
device management for the dock. Users can set ight task plans based on actual needs. The

dji MATRICE 3D Series Specifications

General

Brand	dji
Model	MATRICE 3D Series
Category	Drones
Language	English