dji MATRICE 3D Series - Command and Control Link (C2 Link); Ground Operational Area Setup

DJI Dock 2/Matrice 3D Series Unmanned Aircraft Flight Manual
52
©
2024 DJI All Rights Reserved.
Command and Control Link (C2 Link)
The command and control (C2) link between the aircraft and control station is established using
DJI O3 Enterprise video transmission technology with the OcuSync video transmission antennas
and DJI O3 Enterprise video transmission system, oering stable and reliable communication.
The C2 link provides the control signal from the control station to the aircraft, facilitating real-
time operations. Its performance can be viewed from Supplements > Specifications > Video
Transmission.
Ground Operational Area Setup
The aircraft will take o from and land at the dock. It is recommended to install a protective
fence so that unauthorized personnel cannot enter the area where the dock is installed. Refer
to the Installation and Setup Manual for more information on the protective fence.
>1.0 m
0.47 m
>0.6 m
>0.6 m
>0.6 m
>0.6 m
>1.8 m
>1.8 m