dji NEO - Flight Operation; Palm Control; Notice

3 Flight Operation
DJI Neo supports multiple control methods for various scenarios to meet your needs.
Make sure you are familiar with the notice and usage for each control method before
ight.
• DJI Neo does not feature obstacle sensing. Fly with caution.
• DO NOT touch DJI Neo mid-ight. Otherwise, DJI Neo may drift and a collision
may occur.
• DO NOT y DJI Neo immediately after it has been in a collision or severely
knocked or shaken. DJI Neo may not be able to perform stable ight.
3.1 Palm Control
In Palm Control, palm takeo and landing is supported. You can use the mode button
on DJI Neo to achieve multiple Smart Snaps. DJI Neo will y while recording automatically
after subject conrmation.
*
Connect to the DJI Fly app using the Wi-Fi function to adjust
the parameters for each mode. Refer to the Mobile App Control section to learn more.
The default settings are used as an example.
* Smart Snaps only supports the tracking of people.
Notice
• Power o the remote control devices and goggles connected to the aircraft
before using Palm Control.
• Make sure that the ight environment meets the ight requirements and that
you can control and retrieve DJI Neo immediately when an issue occurs or in an
emergency. In situations where DJI may not be able to analyze the cause of the
incident, it may not be possible for DJI to provide warranty and other aftersales
services.
• Before using Palm Control, make sure that DJI Neo has previously connected to
DJI Fly on your smartphone via Wi-Fi. When using Palm Control without the app,
if DJI Neo malfunctions mid-ight, you can choose to connect it to DJI Fly via
Wi-Fi and control it manually to avoid an accident.
• Make sure to y in an open and unobstructed environment without Wi-Fi signal
interference.
• When using Palm Control, the max ight altitude of DJI Neo is 30 m and the max
ight distance is 50 m.
DJI Neo User Manual
22 © 2024 DJI All Rights Reserved.