dji NEO - Appendix; Specifications; Compatibility; Firmware Update

6 Appendix
6.1 Specications
Visit the following website for specications.
https://www.dji.com/neo/specs
6.2 Compatibility
Visit the following website to get the information on compatible products.
https://www.dji.com/neo/faq
6.3 Firmware Update
Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the device.
Using DJI Fly
When using Mobile App Control, update the rmware according to the prompt on the
home screen in DJI Fly. An internet connection is required during the rmware update.
When using the remote controller, connect the aircraft and remote controller, and run
DJI Fly. You will be notied if a new rmware update is available. Follow the on-screen
instructions to start the update. Note that you cannot update the rmware if the remote
controller is not linked to the aircraft. An internet connection is required during the
rmware update.
Using DJI Assistant 2 (Consumer Drones Series)
Use DJI Assistant 2 (Consumer Drones Series) to update all your devices separately.
1. Power on the device. Connect the device to a computer with a USB-C cable.
2. Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the rmware version.
5. Wait for the rmware to download. The rmware update will start automatically. Wait
for the rmware update to complete.
• The battery rmware is included in DJI Neo rmware. Be sure to update all
batteries.
DJI Neo User Manual
78 © 2024 DJI All Rights Reserved.