dji NEO - Connecting DJI Neo; Smart Snaps

will disconnect from the other devices automatically when the smartphone is
connected via Wi-Fi and the Controls view in the app is opened.
• Make sure to y in an open and unobstructed environment without Wi-Fi signal
interference. Otherwise, the app may disconnect from DJI Neo which may aect
ight safety.
• When using Mobile App Control, the max ight altitude of DJI Neo is 30 m and
the max ight distance is 50 m.
• Return to Home (RTH) is not supported in Mobile App Control. Maintain visual
line of sight within a controlled area.
• DO NOT y over water.
• DJI Neo will land automatically in the following situations. Make sure to observe
the operating environment to avoid DJI Neo to be lost or damaged when
landing.
◆
Critical low battery.
◆
Positioning fails and DJI Neo enters Attitude mode.
◆
DJI Neo detects a collision but does not crash.
Connecting DJI Neo
1. Power on DJI Neo and wait for the system self-diagnostics to complete.
2. Enable Bluetooth, Wi-Fi, and location services on the smartphone.
3. Tap Connection Guide on the bottom right corner of the home screen in the app,
select the device model, and select Connect via Mobile Device.
4. Select the desired device in the search results. The Controls view is displayed after
connected successfully. When connecting the smartphone to DJI Neo for the rst time,
press and hold the power button of DJI Neo to conrm.
• You can also tap the QuickTransfer or Wi-Fi Devices panel on the home screen in
DJI Fly for Wi-Fi connection.
• To change the smartphone connected to DJI Neo, disable Bluetooth and Wi-Fi
on the currently connected smartphone before connecting DJI Neo to the new
smartphone.
Smart Snaps
• Make sure to follow local privacy laws and regulations when using Smart Snaps.
DJI Neo User Manual
© 2024 DJI All Rights Reserved. 29