The remote control devices can be used to control the horizontal movement of the
aircraft during the landing process. Fly the aircraft to a suitable place for landing as soon
as possible.
• When the battery level is too low and there is not enough power to return home,
land the aircraft as soon as possible. Otherwise, the aircraft will crash after the
battery power runs out.
• DO NOT keep pushing the throttle stick upward during auto landing. Otherwise,
the aircraft will crash after the battery is completely depleted.
Loss of remote control or video transmission signal
When the remote control signal or video transmission signal is lost, the aircraft will
automatically initiate Failsafe RTH if the Signal Lost Action is set to RTH.
The aircraft will y backwards 20 m along its original ight route and then perform
the RTH procedure. The aircraft will directly perform the RTH procedure if the signal is
restored when ying backward along the original ight route.
RTH Procedure
After RTH is triggered, the aircraft brakes and hovers in place.
• If the RTH distance is farther than 20 m, it ascends to the RTH altitude and ies back
to the Home Point. The aircraft ies to the Home Point at the current altitude if the
current altitude is higher than the RTH altitude.
• If the RTH distance is farther than 5 m but less than 20 m, the aircraft adjusts its
orientation and ies straight at the current altitude back to the Home Point.
• The aircraft lands immediately if the RTH distance is less than 5 m.
4.4 Auto Landing
In some situations, DJI Neo will land automatically with the landing protection function
supported.
• DO NOT prevent DJI Neo from landing continuously due to a critical low battery.
Otherwise, the battery will be damaged or DJI Neo will crash.
Trigger Method
In the following situations, DJI Neo will land automatically:
DJI Neo User Manual
52 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
