dji NEO - Propellers and Propeller Guards; Removing and Installing

4.6 Propellers and Propeller Guards
DJI Neo comes with detachable propeller guards, which reduce damage to the propellers
caused by collisions. It is required to remove the propeller guards on top of DJI Neo
before removing or installing the propellers.
There are spare propellers in the box of DJI Neo. The packaging of the two propeller
types are labelled with A and B respectively, together with the mounting position using
illustrations. There are marks on the center of propeller A, while propeller B does
not have any mark. Make sure to match the propellers and motors by following the
instructions.
Propellers Marked Unmarked
Illustration
Mounting Posi-
tion
Attach to the motors of the
marked arm
Attach to the motors of the un-
marked arm
Removing and Installing
Propeller Guards
Make sure that DJI Neo is powered o. Remove the propeller guards by following the
steps below.
1. Release the hooks on the propeller guards.
2. Push the propeller guard from the center.
3. Remove the other propeller guard in the same way.
DJI Neo User Manual
56 © 2024 DJI All Rights Reserved.