Method 2: When the aircraft has landed, perform one of the CSC as shown below until
the motors stop.
Stopping the Motors Mid-Flight
• Stopping the motors mid-ight will cause the aircraft to crash.
The default setting for Emergency Propeller Stop in the DJI Fly app is Emergency Only,
which means that the motors can only be stopped mid-ight when the aircraft detects
that it is in an emergency situation such as the aircraft is involved in a collision, a motor
has stalled, the aircraft is rolling in the air, or the aircraft is out of control and is ascending
or descending very quickly. To stop the motors mid-ight, perform the same CSC that was
used to start the motors. Note that you need to hold the control sticks for two seconds
while performing the CSC to stop the motors. Emergency Propeller Stop can be changed
to Anytime in the app. Use this option with caution.
Controlling the Aircraft
The control sticks of the remote controller can be used to control the aircraft movements.
The control sticks can be operated in Mode 1, Mode 2, or Mode 3, as shown below.
Mode 1
DJI Neo User Manual
36 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
