dji NEO - Switching Modes

• Return to Home (RTH) is not supported in Palm Control. Maintain visual line of
sight (VLOS) within a controlled area.
• DO NOT y over water.
• DJI Neo will land automatically in the following situations. Make sure to observe
the operating environment to avoid DJI Neo being lost or damaged due to the
landing.
◆
Critical low battery.
◆
Positioning fails and DJI Neo enters Attitude mode.
◆
DJI Neo detects a collision but does not crash.
• Observe the following rules when taking o from or landing on the palm of your
hand:
◆
Operate DJI Neo in a windless environment whenever possible.
◆
Extend your ngers and keep still. DO NOT place your ngers in the
propeller guards or the propeller rotation range to avoid injury or damage.
◆
DO NOT perform takeo or landing when moving. Otherwise, DJI Neo may
drift and a collision may occur. During landing, DJI Neo may fail to stop the
motors when your hand is moving.
◆
DO NOT throw DJI Neo during takeo.
◆
DO NOT grab DJI Neo by hand.
◆
To land on your palm, place your hand right under DJI Neo to prevent it from
falling after landing.
◆
Take o in an environment with sucient lighting and a richly textured
surface. DO NOT y to an environment that has a signicant dierence in
lighting from the current location.
◆
If DJI Neo fails to perform palm takeo or landing, follow the voice prompt
of DJI Neo for troubleshooting or connect to the DJI Fly app for details. Voice
prompt supports English or Mandarin according to the app language setting
for the lastest connection. Other languages are not supported.
Switching Modes
The default mode is Follow after powering on the device for the rst time. Press the mode
button once to switch to Dronie, Circle, Rocket, Spotlight, or Custom.
The default Custom mode is DirectionTrack.
*
Connect DJI Neo to the mobile app via Wi-Fi
to select Helix or Boomerang. You can also adjust the parameters for each mode in the
app accordingly before ight.
DJI Neo User Manual
© 2024 DJI All Rights Reserved. 23