EasyManua.ls Logo

dji NEO - Trigger Method

dji NEO
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GEO zones may aect RTH. Avoid ying near GEO zones.
The aircraft may not be able to return to the Home Point when the wind speed
is too high. Fly with caution.
If the max altitude is adjusted below the current altitude during RTH, the aircraft
will descend to the max altitude rst and then continue returning to home.
The RTH Altitude cannot be changed during RTH.
When the remote controller signal is normal during RTH, the pitch stick can
only be used to control the ight speed. The orientation and altitude cannot
be controlled and the aircraft cannot be controlled to y to the left or right.
Constantly pushing the pitch stick to accelerate will increase the battery power
consumption speed. The aircraft will brake and hover in place and exit RTH if the
pitch stick is pushed all the way down. You will regain control of the aircraft after
the pitch stick is released.
If the Home Point is within the Altitude Zone but the aircraft is not, when the
aircraft reaches the Altitude Zone it will descend below the altitude limit, which
may be lower than the set RTH altitude. Fly with caution.
RTH cannot be triggered during auto landing.
Trigger Method
The user actively triggers RTH
Using the remote controller: During ight, you can trigger RTH by pressing and holding
the RTH button on the remote controller, or tapping
on the left side of the camera view
in DJI Fly and then pressing and holding the RTH icon.
Using the motion controller: Press and hold the mode button on the motion controller to
initiate RTH. The aircraft will y back to the last updated Home Point. During RTH, press
the lock button once to cancel RTH. After exiting RTH, users will regain control of the
aircraft.
Aircraft low battery
During ight, if the battery level is low and only sucient to y to the Home Point, a
warning prompt will appear in DJI Fly or the goggles. If you conrm RTH or do not take
action before the countdown ends, the aircraft will automatically initiate low battery RTH.
If you cancel the low battery RTH prompt and continue ying the aircraft, the aircraft
will land automatically when the current battery level can only support the aircraft long
enough to descend from its current altitude.
DJI Neo User Manual
© 2024 DJI All Rights Reserved. 51

Table of Contents

Related product manuals