• Make sure the motors are mounted securely and rotating smoothly. Land DJI
Neo immediately if a motor is stuck and unable to rotate freely.
• DO NOT attempt to modify the structure of the motors.
• DO NOT touch or let hands or body parts come in contact with the motors after
ight, as they may be hot.
• DO NOT block any of the ventilation holes on the motors or the body of DJI Neo.
• Make sure the ESCs sound normal when DJI Neo is powered on.
4.7 Intelligent Flight Battery
DJI Neo uses the DJI Neo Intelligent Flight Battery, model BWX521-1435-7.3.
*
* The battery chemical system is LiNiMnCoO2.
Notice
• Read and strictly follow the instructions in this manual, in the Safety Guidelines
and on the battery stickers before using the battery. You shall take full
responsibility for all operations and usage.
1. DO NOT charge an Intelligent Flight Battery immediately after ight as it may be too
hot. Wait for the battery to cool down to the allowable charging temperature before
charging again.
2. To prevent damage, the battery only charges when the battery temperature is
between 5° and 40°C (41° and 104°F). The ideal charging temperature is from 22° to
28°C (71.6° to 82.4°F). Charging at the ideal temperature range can prolong battery
life. Charging stops automatically if the temperature of the battery cells exceed 55°C
(131°F) during charging.
3. Low-Temperature Notice:
• Batteries cannot be used in extremely low-temperature environments of lower
than -10°C (14°F).
• Battery capacity is signicantly reduced when ying at low temperatures from -10°
to 5°C (14° to 41°F). Make sure to fully charge the battery before takeo. Hover
the aircraft in place for a while to warm up the battery after takeo.
• It is recommended to warm up the battery to at least 10°C (50°F) before takeo
when ying in low-temperature environments. The ideal temperature to warm up
the battery is above 20°C (68°F).
DJI Neo User Manual
60 © 2024 DJI All Rights Reserved.
To Next Page
Loading...
