dji NEO - Cruise Control

• DO NOT use QuickShots in any of the following situations:
◆
When the subject is blocked for an extended period of time or outside the
visual line of sight.
◆
When the subject is more than 10 m away from the aircraft.
◆
When the subject is similar in color or pattern with the surroundings.
◆
When the subject is in the air.
◆
When the subject is moving fast.
◆
The lighting is extremely dark (<15 lux) or bright (>10,000 lux).
• DO NOT use QuickShots in places close to buildings or where the GNSS signal is
weak. Otherwise, the ight path will become unstable.
• Make sure to follow local privacy laws and regulations when using QuickShots.
Using QuickShots
1. Launch and hover the aircraft at least 2 m (6.6 ft) above the ground.
2. Tap the Shooting Mode icon on the right side of the camera view and select
QuickShots .
3. After selecting one sub-mode, tap the plus icon or drag-select the subject on
the screen. Then tap
to begin shooting. The aircraft will record footage while
performing a preset ight movement according to the option selected, and generate
a video afterwards. The aircraft will y back to its original position once recording is
nished.
Exiting QuickShots
Tap or press the Flight Pause button on the remote controller once. The aircraft will exit
QuickShots immediately and hover.
Video Playback
After recording is complete, tap the Playback button
to preview the footage.
Tap Create QuickShots to preview the QuickShots video.
Cruise Control
Cruise Control enables the aircraft to y at a constant speed automatically, which makes
long distance ights eortless, and helps to avoid image shaking which often happens
DJI Neo User Manual
© 2024 DJI All Rights Reserved. 43