EasyManua.ls Logo

dji NEO - Inserting and Removing the Battery

dji NEO
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The reduced battery capacity in low-temperature environments reduces the wind
speed resistance performance of the aircraft. Fly with caution.
Take extra caution when ying at a high elevation with a low temperature.
4. A fully charged battery will automatically discharge when it is idle for a period of time.
Note that it is normal for the battery to emit heat during the discharging process.
5. Fully charge the battery at least once every three months to maintain battery health. If
the battery is not used for an extended period, battery performance may be aected
or may even cause permanent battery damage. If a battery has not been charged or
discharged for three months or more, the battery will no longer be covered by the
warranty.
6. For safety purposes, keep the batteries at a low power level in transit. Before
transportation, it is recommended to discharge the batteries to 30% or lower.
Inserting and Removing the Battery
Insert the Intelligent Flight Battery as shown below. Make sure to fully insert the battery
until you hear a "click", which indicates the battery latch is securely fastened.
Press the textured part of the battery latch and push the battery to the rear of DJI Neo to
remove it.
DJI Neo User Manual
© 2024 DJI All Rights Reserved. 61

Table of Contents

Related product manuals