dji NEO - Charging the Battery; Using a Charger

Charging the Battery
Fully charge the battery before each use. It is recommended to use the charging devices
provided by DJI, such as the DJI Neo Two-Way Charging Hub, DJI 65W Portable Charger, or
other USB Power Delivery chargers. The DJI Neo Two-Way Charging Hub and the DJI 65W
Portable Charger are both optional accessories. Visit the ocial DJI online store for more
information.
Using a Charger
≥10 W
(5 V, 2 A)
1. Make sure the battery has been securely installed in DJI Neo and is powered o.
2. Connect a charger to an AC power supply (100-240V, 50/60Hz; use a power adapter if
necessary).
3. Connect the charger to the charging port on DJI Neo using a USB-C cable.
4. The battery level LEDs display the current battery level during charging.
5. The battery is fully charged when all the battery level LEDs emit a solid light. Remove
the charger from DJI Neo when the battery is fully charged.
• The battery cannot be charged if the device is powered on.
• The maximum charging power supported for the USB-C port on DJI Neo is 15W.
The table below shows the battery level during charging.
Blinking Pattern Battery Level
0-50%
51-75%
76-99%
100%
DJI Neo User Manual
64 © 2024 DJI All Rights Reserved.