dji NEO - Page 84

GEO Awareness Pre-Warning: The app will prompt you with warning information when
the aircraft is near or in a restricted area to remind you to y with caution.
AGL (Above Ground Level) Statement
The vertical part of Geo-Awareness may use the AMSL altitude or the AGL height. The
choice between these two references is specied individually for each UGZ. Neither AMSL
altitude nor the AGL height is supported by DJI Neo. The height H appears in the DJI
Fly app camera view, which is the height from the aircraft takeo point to the aircraft.
The height above the takeo point may be used as an approximation but may dier
more or less from the given altitude/height for a specic UGZ. The remote pilot remains
responsible for not breaching the vertical limits of the UGZ.
Takeo
AGL (not supported)
H
Height error
Restricted Zones
Appear red in the DJI app. You will be prompted with a warning, and ight is prevented.
UA cannot y or take o in these zones. Restricted Zones may be unlocked, to unlock
contact ysafe@dji.com or go to Unlock A Zone at dji.com/ysafe.
When taking o:
1. Receiving a warning
2. Can not take o
3. You can apply on the DJI ocial website after manual approval
Ground
Restricted Zones
20 m
Receiving a warning
100 m
Limit maximum speed
When approaching:
1. Receiving a warning
2. Can not y in
3. You can apply on the DJI ocial website
after manual approval
Authorization Zones
Appear blue in the DJI app. You will be prompted with a warning, and ight is limited by
default. UA cannot y or take o in these zones unless authorized. Authorization Zones
may be unlocked by authorized users using a DJI veried account.
DJI Neo User Manual
84 © 2024 DJI All Rights Reserved.